Swing Handle
The Tambortech Swing Handle is designed for accessing high shelving behind Tambortech Doors.
Particularly suitable for cabinets that open to more than 1750 mm above floor height.
Shelving must be set back a minimum of 50 mm from the front edge of the gable to allow clearance for the Swing Handle to function properly.
Minimum cabinet opening width required is 465 mm.
If centre mortice lock is fitted, minimum cabinet opening width required is 965 mm.
The Swing Handle should be installed after the completed installation of the Tambortech Door.
Can be installed left or right handed.
The Swing Handle does not have to be centre of the Door - works well off centre.
Can not be used in conjunction with a bar lock.